MidWall™ is designed to support out-of-plane loading in cantilevered partial wall systems that are unsupported at the top track. The out-of-plane loads are transferred to the floor system through a ½” thick plate nested in the flanges of the member with two 3/8″ diameter fasteners (or [one] ½” diameter fastener for 250MW) used for the connection. Available in two Heights, 24″ and 48″, MidWall™ steel kits may be used in place of standard framing members, or in conjunction with them to frame the wall. Stud Width Options are: 2-1/2″. 3-5/8″ and 6″

Value:

Replaces labor/coordination of placing embedded angle into floor system
Guide holes for attachment of MidWall to the stud
Only certified steel is used
3.625″ and 6″ Meets IBC criteria Section 1607.7.1
Test data for 2.5″ depth MidWall is available

One of our best selling Stainless Steel Corner Guards is the 2-1/2″ x 2-1/2″ Wide Legs x 48″ in length.

The 48″ Length easily covers the height of a wall corner, and the 2-1/2″ gives adequate protection along the edge of the walls offering excellent protection.

2.5″ x 2.5″ Best Selling Stainless Steel Corner Guard